Skip to main content

Configure Yum for Proxy Server

Configure the Cent OS in the proxy network for yum update and public repository.

It's a not a big deal for this configuration, we have to add simple line into the yum.conf file like this :





Note: There is two option to configure the proxy :
1> Put the system host in the IP Pass list in the proxy server.
2> put the username and password in the yum.conf, like this :


and move the CentOS-Media.repo to the old directory so that the we can easily and verify the configuration with yum update like this:


The reason behind to move the CentOS-Media.repo to the old directory that, if it not found the local media then it will not continue.

and be careful  about the proxy setting, you are using one of them.


Thanks for reading.
Naresh Mahato

Comments

Post a Comment

Popular posts from this blog

ArubaOS-CX, ArubaOS- Switch, Comware and Cisco IOS

The command line comparison demonstrated for 4 different OS of the switches, I think this will help you to understand the configuration level deployment. Comware Differences If you are familiar with either the ArubaOS-Switch CLI or the Cisco IOS CLI, you will notice that the  Comware CLI is organized slightly differently . Comware was designed for Internet service providers (ISPs). Many features and functions—such as security and Quality of Service (QoS)—are multi-tiered to  support the different needs of multiple entities accessing the same switch. ArubaOS-CX ArubaOS switch (now the Aruba OS), HPE Comware version 7 Cisco IOS ArubaOS-CX operating system runs on the 8400 and 8320 switches. ArubaOS Switch operating system runs on Aruba 2530 , Aruba 2920 , Aruba 2930F , Aruba 2930M , Aruba 3810M , Aruba 5400R , HPE 2620 , HPE 3500 , HPE 5400 and HPE 3800 switch platforms. HPE Comware7 operating system runs on HPE FF 12900 , HPE 12500 , HPE 5120/5...
4 comments
Read more

HP A5120 Configuration

Today I am going to configure the HP A5120-24G EI Switch. We require the COM1 Port on the system and console cable. The pictures are shown below: COM1: Console Cable: Or You can use converter like this to connect to your laptop USB port : Connect the cable to the console cable with your system and power on the switch and hit Enter Press ENTER to get started,  you will able to see like this: <HPSWITCH> #Apr 26 12:19:44:864 2000 HPSWITCH SHELL/4/LOGIN:  Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console %Apr 26 12:19:44:995 2000 HPSWITCH SHELL/5/SHELL_LOGIN: Console logged in from aux0. <HPSWITCH> <HPSWITCH> As we know that the cisco having three stage to get into the switch console, just like same here. user mode : > privilege mode : # and the global config mode: config# same structures are here but little more differ from the Cisco here we have the user mo...
1 comment
Read more