Skip to main content

HPE OfficeConnect1920 Series Switch

Today, I am going to demonstrate how to configure  HPE OfficeConnect1920 Series Switch.

Let's Start !

We have to Open and set the marked variable on the Putty.



and hit open, after that we are able to get the console of the switch.

like this:

The default username is admin and the password is none means blank.


there is nothing to do with the CLI in this switch, but more and advanced settings are available in the GUI,

First We have to set the IP Address of the Switch.



and verify the config and ping.

Set the Password of the admin user :


To save the configuration.



Now we can access the Switch from the GUI:

Now we can do everything from this GUI, Trunk, Device Name, syslogs, snmp and many more also we can view the status of the interface :


So now we have the GUI interface to so everything which switch support.

Thanks for reading, happy learning.. :)


                                                                                                        Demonstration By :-
                                                                                                                                           Naresh Mahato.

Comments

Post a Comment

Popular posts from this blog

PRTG Backup and Restore

Hi All ! Today I am going to demonstrate how to backup PRTG and restore. Let's starts ! 1> we have to stop the service of the PRTG Core Server Service and PRTG Probe Service 2>  go to start run and type %programdata% and copy the Paessler folder to the another location 3> Before reinstalling the PRTG restore the backup copy of the data (Paessler folder)  as the previous location (%programdata%)  and then install the PRTG, and remove the Network Discovery if not required. you will find the old data with the new PRTG, it don't matter what the OS you are using. Now it has been completed your backup and restore the PRTG. Happy Learning !
Post a Comment
Read more

ArubaOS-CX, ArubaOS- Switch, Comware and Cisco IOS

The command line comparison demonstrated for 4 different OS of the switches, I think this will help you to understand the configuration level deployment. Comware Differences If you are familiar with either the ArubaOS-Switch CLI or the Cisco IOS CLI, you will notice that the  Comware CLI is organized slightly differently . Comware was designed for Internet service providers (ISPs). Many features and functions—such as security and Quality of Service (QoS)—are multi-tiered to  support the different needs of multiple entities accessing the same switch. ArubaOS-CX ArubaOS switch (now the Aruba OS), HPE Comware version 7 Cisco IOS ArubaOS-CX operating system runs on the 8400 and 8320 switches. ArubaOS Switch operating system runs on Aruba 2530 , Aruba 2920 , Aruba 2930F , Aruba 2930M , Aruba 3810M , Aruba 5400R , HPE 2620 , HPE 3500 , HPE 5400 and HPE 3800 switch platforms. HPE Comware7 operating system runs on HPE FF 12900 , HPE 12500 , HPE 5120/5...
4 comments
Read more