Night Reader

Today, I am going to demonstrate how to configure  HPE OfficeConnect1920 Series Switch. Let's Start ! We have to Open and set the marked variable on the Putty. and hit open, after that we are able to get the console of the switch. like this: The default username is admin and the password is none means blank. there is nothing to do with the CLI in this switch, but more and advanced settings are available in the GUI, First We have to set the IP Address of the Switch. and verify the config and ping. Set the Password of the admin user : To save the configuration. Now we can access the Switch from the GUI: Now we can do everything from this GUI, Trunk, Device Name, syslogs, snmp and many more also we can view the status of the interface : So now we have the GUI interface to so everything which switch support. Thanks for reading, happy learning.. :)               ...

Today I am going to configure the HP A5120-24G EI Switch. We require the COM1 Port on the system and console cable. The pictures are shown below: COM1: Console Cable: Or You can use converter like this to connect to your laptop USB port : Connect the cable to the console cable with your system and power on the switch and hit Enter Press ENTER to get started,  you will able to see like this: <HPSWITCH> #Apr 26 12:19:44:864 2000 HPSWITCH SHELL/4/LOGIN:  Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1: login from Console %Apr 26 12:19:44:995 2000 HPSWITCH SHELL/5/SHELL_LOGIN: Console logged in from aux0. <HPSWITCH> <HPSWITCH> As we know that the cisco having three stage to get into the switch console, just like same here. user mode : > privilege mode : # and the global config mode: config# same structures are here but little more differ from the Cisco here we have the user mo...

Trace Result | Connectivity Testing | Path Analyzing  Let's Check the internet connectivity. That is working or not, i means if there is ISP issue or not. Let's start first we have to check the connectivity of the connecting media. Means LAN/ WLAN Windows > Run > ncpa.cpl please check your desired media card is connected or not, if not then the issue with the card or medium. if the desired connection is showing connected then we can proceed further, check the IP address of your system. Windows > Run > cmd and hit the command : like this : ipconfig Wireless LAN adapter Wi-Fi:    Connection-specific DNS Suffix  . :    Link-local IPv6 Address . . . . . : fe80::cd0f:defa:613a:7c%2    IPv4 Address. . . . . . . . . . . : 192.168.20.100    Subnet Mask . . . . . . . . . . . : 255.255.255.0    Default Gateway . . . . . . . . . : 192.168.20.254 snapshot: *Note: Be careful if the sys...